Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX, and then press the Enter key to start the Remote Printer Console main program.

The Main Screen will appear on your computer screen as shown below.

 

 

 

 

Remote Printer Console

 

 

 

 

Direct_Access

Printer_Setup

Console_Config

 

Guide

 

 

 

 

 

Current Status

 

 

 

 

 

 

 

Status

Ready

 

 

 

 

 

Media Type

Regular

 

 

 

 

 

Paper feed

Paper Cassette

 

 

 

 

 

Emulation

Laser Jet 5P

 

 

 

 

 

Paper Size

Letter

 

 

 

 

 

Orientation

Portrait

 

 

 

 

 

Quality

Normal

 

 

 

 

 

Copies

1

 

 

 

 

 

 

 

 

Memory size

2138112 Byte

 

 

 

 

 

[↑/¬] Select

 

[Enter] Setting

 

 

 

 

 

 

 

 

 

 

[Alt+Character] Menu [F1] Help [ESC] Exit

If bi-directional communication is enabled between your computer and DCP when it starts, the RPC gets the current settings information from your DCP. Otherwise, RPC shows its default settings. If you want to change settings, move the cursor to the item you want and select it using the Enter and Cursor keys. Then, press the Enter key to make the selected settings valid.

There are four sub menus. (See table below.) Select the sub menu you want by clicking on it with the mouse, using the cursor keys and the Enter key, or by pressing the hot key commands for that sub menu.

Menu

Press the keys

Functions

 

 

 

Direct

Alt + D

You can directly control the Brother DCP, with Print

Access

 

Form.

 

 

 

Printer

Alt + P

You can enter the setting mode to change other

Setup

 

printer settings, such as, margin settings, continue

 

 

mode, font and sleep mode.

 

 

 

Console

Alt + C

You can change the environment settings for the

Config

 

RPC program: color, etc.

 

 

 

Guide

Alt + G

You can go to the Guide mode.

 

 

 

Help

F1

You can get Online Help: If you press F1, you can

 

 

get information on a highlighted item.

 

 

 

F O R D O S U S E R S

6 - 3