F O R D O S U S E R S
6 - 2
Follow the instructions in the installer.
7
Type RPCSETUP, and then press Enter. x:\DOS>RPCSETUP
6
Type CD DOS, and then press Enter. x:\>CD DOS
5
Follow these steps to install the remote printer console program:
1 Make sure your Brother DCP is connected to your computer and is set to Online.
2 Start your computer and go to the DOS prompt. If you are in Windows®, exit and return to the DOS prompt.
3 Insert the Brother CD-ROM into your CD-ROM drive.
4 At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM drive for “x”), and then press Enter.
C:\>x:
Installing the Remote Printer Console
Before you install the program, make sure you have the following hardware and software to install the program:
DOS | Version 3.3 or later | |
Monitor | EGA/VGA or compatible | |
Option | Mouse; the mouse driver must be installed. | |
|
| (You can also operate the program with the keyboard.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|