Insert your document.
Turn on your scanner.
Make sure that SD appears on the LCD display.
4 Scan Using the Control Panel
Scanning in SD mode
a Insert the SD card into the SD card slot.
4
NOTE
When you use a purchased SD card, you must format the SD card first. To format the SD card on your scanner, see Formatting an SD card on page 11.
b c
d If necessary, adjust the scanning settings by pressing the COLOR / MONO, PDF / JPG and HQ / STD (2 side / 1 side) buttons on the control panel.
e
f Your scanner starts scanning automatically.
The Power button LED blinks green and SD blinks on the LCD.
g The scanned image is stored on the SD card. Check the scan result just in case.
NOTE
To access the scanned images on the SD card, see Access Scanned Images on the SD Card on page 51.
18