Scan Using Your Computer
Changing DSmobileCapture scan settings (for Macintosh)
Image settings
Click the Image tab to choose image type and to set several basic scan settings.
NOTE
This image is from the
5
(3)
(4)
(1)
(5)
(6)
(2)
(7)
(8)
| (9) |
|
|
|
| (10) |
|
|
|
|
| ||
|
|
|
|
|
|
|
(1) | Image Selection Box | Choose the type of document you want to scan. | ||||
|
|
|
|
|
|
|
(2) | Duplex | |||||
|
|
|
| ning. | ||
(3) | Brightness | Adjusts the lightness or darkness of an image. The range is from | ||||
|
|
|
| factory default is 0. | ||
(4) | Contrast | Adjusts the range between the darkest and the lightest shades in the image. The | ||||
|
|
|
| range is from | ||
(5) | Resolution | Determine the quality of the scanned image. The factory default is 200 dpi. | ||||
(6) | Invert | Reverse the brightness and the colors in the image. | ||||
|
|
|
|
|
|
|
(7) | Page Size | Page Size allows you to capture a portion of the scanned document. Choose your | ||||
|
|
|
| paper size from the Page Size | ||
(8) | Profiles | Save or change the scanning setting in the dialog box of Scanner Properties. | ||||
(9) | Default | Reset values in this and all other Properties tabs to the original factory settings. | ||||
|
|
|
|
|
|
|
36