Scan Using Your Computer

(2)

Scan Area

Choose your paper size from the drop-down list or create a custom paper size by

 

 

 

clicking Add in the drop-down list.

 

 

 

If you selected Fix for Transfer in Cropping (1), define the X-Offsetand

 

 

 

Y-Offsetor specify Width and Length to redefine the scan area. The Display

 

 

 

Area (4) in this screen displays image placement as you change the values.

 

 

 

• X-Offset- the distance from the left edge of the document to the left edge of the

 

 

 

 

scanned area.

 

 

 

• Y-Offset- the distance from the top edge of the document to the top edge of the

 

 

 

 

scanned area.

 

 

 

• Width - the width of the scanned area.

 

 

 

• Length - the length of the scanned area.

5

 

 

 

 

 

 

•

Use these arrows (or your mouse) to move the scan area; you can view

 

 

 

 

the results in the Display Area of this screen.

 

(3)

Adjustment

Adjustment allows you to add a specific margin at left, right, top and bottom of

 

 

 

your image. This may help to reduce possible corner clipping on any skewed im-

 

 

 

ages. Select a value from 0 to +5 mm. The Adjustment result will not appear in

 

 

 

the Display Area.

 

(4)

Display Area

Displays image placement as you change the values in Scan Area (2).

 

 

 

 

 

(5)

Unit

Unit allows you to define your preferred measurement system. Select Inches, Mil-

 

 

 

limeters, or Pixels from the drop-down list.

 

(6)

Transfer Timeout

Transfer Timeout allows you to set the amount of time (in seconds) the scanner

 

 

 

will wait before starting automatic scan after the first scan job is completed. When

 

 

 

you have many separate documents that need to be scanned with the same scan

 

 

 

settings, this feature is especially useful. The default time is 30 seconds.

 

 

 

The value ranges from 0 to 60 seconds.

 

(7)

Defaults

Reset values in this and all other Properties tabs to the original factory settings.

 

 

 

 

 

 

30