Scan Using Your Computer

Image settings

Click Setup , and then click the Image tab to choose image type and to set basic scan settings.

NOTE

This image is from the DS-920DW.

(3)

5

 

(4)

 

(5)

 

(1)

 

(6)

 

(2)

(7)

(8)

(1)

Image Selection Box

Choose the type of document you want to scan.

 

 

 

(2)

Duplex

(DS-920DW only) Select the Duplex check box to perform Duplex (2 side) scan-

 

 

ning.

(3)

Brightness

Adjusts the lightness or darkness of an image. The range is from -100to +100. The

 

 

factory default is 0.

(4)

Contrast

Adjusts the range between the darkest and the lightest shades in the image. The

 

 

range is from -100to +100. The factory default is 0.

(5)

Resolution

Determine the quality of the scanned image. The factory default is 200 dpi.

 

 

 

(6)

Invert

Reverse the brightness and the colors in the image.

(7)

Profiles

Save or change the scanning setting in the dialog box of Scanner Properties.

 

 

 

(8)

Defaults

Reset values in this and all other Properties tabs to the original factory settings.

 

 

 

28