Brother 882-C40/C42, Embroidery and Sewing Machine Note, Memo, Memo, Press, Press, Press, and ), Press, Press, Press, aPress, bPress, aPress, bPress, aPress, bPress, “Eco Mode”;, “Shutoff Support Mode”;

LCD SCREEN

■Selecting the “Eco Mode” or “Shutoff Support Mode”

You can save the machine power by setting the eco mode or the shutoff support mode.

If you leave the machine without using for a specified period of time, the machine enters in one of these modes.

“Eco Mode”;

Machine will enter a sleep mode. Touch the screen or any operational button to continue sewing.

“Shutoff Support Mode”;

Machine will turn off after set period of time. Turn machine off and then back on to restart sewing.

Condition	Eco Mode	Shutoff Support
		Mode

Available time	0 - 120 (minute)	1 - 12 (hour)

“Start/Stop” button	Green flashing	Green slow flashing

Suspended function	Machine light,	All functions
	Screen display, LED
	pointer, Guideline
	marker

After recovering	The machine starts	You need to turn off
	from the previous	the machine.
	operation.

Press the “Start/Stop” button or touch the screen display to recover from these modes.

aPress .

→The settings screen appears.

bPress .

→The General settings screen appears.

cDisplayscreen. page 5 of the General settingsdUse or to select the time until entering the mode.

Note

•If you turn off the machine while the machine is in the “Eco Mode” or the “Shutoff Support Mode”, wait for about 5 seconds before turning on the machine again.

■Changing the Pointer Shape When a USB Mouse Is Used

In the settings screen, the shape can be selected for the pointer that appears when a USB mouse is connected. Depending upon the background color, select the desired shape from the three that are available.

Memo

•For details on changing the background color, refer to “Changing the Background Colors of the Embroidery Patterns” on page B-33.

aPress .