Brother 882-C40/C42, Embroidery and Sewing Machine Memo, Press, bPress, touched, guideline marker, aTurn on the machine, decreased/increased value, to set quickly to the most, mm (approx. 1/4 inch) wide when

USING SENSOR FUNCTIONS WITH SEWING STITCH

USING SENSOR FUNCTIONS WITH SEWING STITCH

Before using the sensor functions, carefully read “Utility Stitches” chapter to familiarize yourself with the machine operations.

The sensor functions are performed using the sensor pen.

Sensor Function Area	Memo
	• There are borderline areas between setting
When using the sensor pen with utility stitches, the	area and adjustment areas, which allow you
	to set quickly to the most
operations may differ depending on the area to be
	decreased/increased value.
touched.
	• The borderline areas are respectively 6.5
	mm (approx. 1/4 inch) wide when
	positioning the guideline marker, and 10
	mm (approx. 3/8 inch) wide in other cases.

			Specifying the Guideline Marker
			Position With the Sensor Pen
			The sewing position will be indicated by a red
			guideline marker.
			The position of the guideline marker can be
			adjusted to your desired location.
			aTurn on the machine.
			bPress		.
a Center needle		Sewing position for stitch patterns sewn	c	Press	.
	position	with the center needle position
b Setting area		Area 3.5 mm to the left and right of a.
		Touch this area with the sensor pen to
		specify a position.
		Area 7 mm, when positioning the
		guideline marker.
c Adjustment area		Touch: With each touch, the setting
	(right)	increases by 0.5 mm. This allows fine
		adjustments to be made after touching
		within b to specify a position.
		Long touch: After touching b to specify
		a position or adjusting the position by
		touching within c or d, long touch to
		apply the setting.
d Adjustment area		Touch: With each touch, the setting
	(left)	decreases by 0.5 mm. This allows fine
		adjustments to be made after touching
		within b to specify a position.
		Long touch: Apply the setting in the
		same way as a long touch within c.

eThe sensor pen touch range extends approximately 200 mm (7-7/8 inches) toward you from the needle drop point and 130 mm (approx. 5 inches) to either side of the middle (center)

needle position.	→ The sensor functions screen appears, and the
	guideline marker flashes.

B-76