Setting Beeper Volume

You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the beeper is set to LOW or HIGH, the fax machine beeps every time you press a key or make an error, and at the end of fax sending or receiving.

1

Press Menu/Set, 1, 3.

3.BEEPER

 

 

2

Press or to select your setting, and then press Menu/Set.

3 Press Stop/Exit.Choosing the Handset Volume (For Volume Amplify)

Before you begin to use the machine, you must decide if you need to set the handset volume to AMPLIFY:ON for a user who is hearing-impaired. The AMPLIFY volume level complies with FCC standards.

VOLUME AMPLIFY: OFF

This default setting is appropriate if none of the users are hearing-impaired. During a

conversation, users can press Volume or on the control panel to adjust the volume

to LOW or HIGH. When the handset is replaced, the handset volume will remain until you change it again.

VOLUME AMPLIFY: ON–TEMPORARY

This setting is appropriate if some of the users are hearing-impaired. During a

conversation, users can press Volume or on the control panel to adjust the volume

to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume returns to the default setting of LOW.

VOLUME AMPLIFY:ON–PERMANENT

Choose VOL AMPLIFY:ON–PERMANENTif all of the users are hearing-

impaired. During a conversation, users can press Volume or on the control panel to

adjust the volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume returns to the default setting of AMPLIFY.

When you press Volume or on the control panel to adjust the volume, the LCD shows

the setting you are choosing. Each key press changes the volume to the next setting.

WARNING

It is important that you do not choose PERMANENT unless all users are

hearing-impaired.Otherwise, the default setting of AMPLIFY may damage the hearing of some users.

I N I T I A L S E T U P

4 - 4