Woodstock ST1000 Installing Fence, To install the fence, Components and Hardware Needed

Installing Fence
Components and Hardware Needed:	Qty
Fence Body	1
Front Angled Rail	1
Front Square Rail	1
Rear Rail	1
Hex Bolts M6-1 x 10	4
Hex Bolts M6-1 x 20	4
Lock Washers 6mm	7
Flat Washers 6mm	7
Knob M10-1.5 x 25	1
To install the fence:

1.Secure the rear rail against the rear of the table with the flat un-drilled surface facing up, and install two M6-1 x 20 hex bolts flat washers and lock washers.

2.Attach the front angled rail to the front of the table with M6-1 x 20 hex bolts, flat washers, and lock washers.

3.Attach the square rail to the front angled rail with the M6-1 x 10 hex bolts, lock washers and flat washers (Figure 17).

Figure 17. Installing front rail system.

4.Set the fence on the fence rail to the left of the blade.

5.Secure the fence with the M10-1.5 x 25 knob (Figure 18).

Figure 18. Correctly installed fence.

-14- ST1000 14" Bandsaw