Woodstock ST1000 owner manual Installing Blade, Guides, To install the lower blade guide

Installing Blade
Guides
Components and Hardware Needed:	Qty
Upper Guide Assembly	1
Lower Guide Assembly	1
Blade Guard	1
Lower Guard	1
Hex Bolts M6-1 x 20	2
Hex Bolts M6-1 x 10	2
Hex Bolt M6-1 x 16	1
Fender Washers 6mm	2
Flat Washers 6mm	2
To install the lower blade guide:

1.Align and place the lower guard onto the body.

2.Align and place the lower guide assembly onto the lower guard, and insert the M6-1 x 20 hex bolts and 6mm flat washers (Figure 12).

Lower Guide

Assembly

Lower

Guard

Figure 12. Installing lower blade guide assembly.

To install the upper blade guide assembly:

1.Slide the upper guide assembly onto the guide post until the bottom of the guide post is flush with the bottom of the blade guide post hous- ing (Figure 13) and secure with an M6-1 x 16 hex bolt.

Figure 13. Installing upper blade guide.

2.Attach the blade guard to the upper guide assembly with the M6-1 x 10 hex bolts and 6mm fender washers, as shown in Figure 14.

Figure 14. Installing upper blade guard.

The blade guard MUST be installed during oper- ation. Failure to follow this warning may result in serious personal injury!

-12- ST1000 14" Bandsaw