Woodstock ST1000 owner manual Main Inventory Figure, Fence Inventory Figure, Hardware

Inventory

After all the parts have been removed from the two boxes, you should have the following items:

Main Inventory (Figure 4)						Qty
A.	Body Assembly					1
B.	Miter Gauge					1
C.	Table					1
D.	Trunnion Support Bracket		.......................................			1
E.	Motor with Pulley & Switch					1
F.	Base Plate					1
G.	Legs					4
H.	Front/Rear Leg Braces					2
I.	Side Leg Braces					2
J.	Body Support Braces					2
K.	Saw Blade					1
L.	Hardware Bag					1
M.	Hardware Bag					1
N.	Hardware Bag					1
	A
			F
					G
		G
			H
				I
	E					M
		K			L
			J
		C
					N
	D			B
	Figure 4. Inventory contents.
Fence Inventory (Figure 5)						Qty
O.	Fence Body					1
P.	Rear Angled Rail					1
Q.	Front Square Rail					1
R.	Front Rail					1
S.	Hardware Bag					1

	O
	Q
	P
	R
	S
	Figure 5. Fence inventory.
Hardware		Qty
•	Carriage Bolts M8-1.25 x 16 (Stand)	34
•	Flange Nuts M8-1.25 (Stand)	34
•	Hex Bolts M8-1.25 x 35 (Body/Stand)	4
•	Flat Washers 8mm (Body/Stand)	4
•	Lock Washers 8mm (Body/Stand)	4
•	Hex Nuts M8-1.25 (Body/Stand)	1
•	Cap Screws M8-1.25 x 25 (Motor)	2
•	Fender Washers 8mm (Motor)	2
•	Lock Washers 8mm (Motor)	2
•	Plastic Cord Clamp (Motor Cord)	1
•	Metal Cord Clamp (Switch Cord)	1
•	Phillips Head Screw M5-.8 x 6 (Switch Cord)	.... 1
•	Star Washer 5mm (Switch Cord)	1
•	Phillips Head Screws M5-.8 x 15 (Switch)	2
•	External Tooth Lock Washers 5mm (Switch)	2
•	Phillips Head Screws M5-.8 x 12 (Cords)	2
•	Hex Bolts M6-1 x 20 (Lower Blade Guides)	2
•	Flat Washers 6mm (Lower Blade Guides)	2
•	Hex Bolt M6-1 x 16 (Upper Blade Guide)	1
•	Hex Bolts M6-1 x 10 (Blade Guard)	2
•	Fender Washers 6mm (Blade Guard)	2
•	Hex Bolts M8-1.25 x 30 (Table)	2
•	Lock Washers 8mm (Table)	2
•	Knobs M10-1.5 (Table)	2
•	Hex Bolts M8-1.25 x 80 (Positive Stop)	1
•	Hex Nuts M8-1.25 (Positive Stop)	1
•	Hex Bolts M6-1 x 10 (Fence Rails)	4
•	Hex Bolts M6-1 x 20 (Fence Rails)	4
•	Lock Washers 6mm (Fence Rails)	8
•	Flat Washers 6mm (Fence Rails)	8
•	Knob M10-1.5 x 25 (Fence)	1
•	Upper Guide Assembly	1
•	Lower Guide Assembly	1
•	Blade Guard	1
•	Lower Guard	1

-8- ST1000 14" Bandsaw