Slide the thread into the thread |
|
|
jfrom the right to the left. | Threading the needle |
|
a | This section describes how to thread the needle. |
|
| ■ For models equipped with the thread guide | 1 |
| disk | |
| Pull the end of the thread, which has been |
|
| apassed through the needle bar thread guide, |
|
| to the left (A), and then firmly pull it from the |
|
| front (B) through the slit in the thread guide |
|
| disk. Make sure that the thread passes the |
|
| notch of the thread guide. |
|
a Thread
Memo
● If the needle is not raised, the thread take- up lever cannot be threaded. Be sure to press the needle position button to raise the needle before threading the thread
Pass the thread behind the needle bar thread |
|
| |
kguide. |
|
| |
The thread can easily be passed behind the |
|
| |
needle bar thread guide by holding the thread | a |
| |
in your left hand, and pulling the thread into | b | ||
| |||
the guide from right to left. | B |
| |
| A |
| |
| a Thread guide disk |
| |
| b Notch of the thread guide |
|
a
aNeedle bar thread guide
lLower the presser foot lever.
a
aPresser foot lever
23