GETTING READY—————————————————————————————————————————————————————————————————————————————————————————————————————

ePlace the presser foot to be installed below the holder so that the presser foot pin is aligned with the notch in the holder.

Position the presser foot so the letter indicating the presser foot type (J, A, etc.) is positioned to be read.

gRaise the presser foot lever to check that the presser foot is securely attached.

a

J

b

c

aPresser foot holder

bNotch

cPin

dPresser foot type

Memo

4

Removing the presser foot holder

Remove the presser foot holder when cleaning the sewing machine or when installing the optional walking foot.

aRemove the presser foot.

●The code for the presser foot to be used with each stitch appears in the LCD. For details on selecting a stitch, refer to “Selecting a stitch” (page 42).

fSlowly lower the presser foot lever so that the presser foot pin snaps into the notch in the presser foot holder.

a Presser foot lever b Presser foot holder c Notch

d Pin

a

b

• For details, refer to “Replacing the presser

foot” (page 33).

Loosen the presser foot holder screw, and

bthen remove the presser foot holder.

Turn the screwdriver counterclockwise.

a

b

c

aScrewdriver

bPresser foot holder

cScrew

c d

XThe presser foot is attached.

34