GETTING READY—————————————————————————————————————————————————————————————————————————————————————————————————————

dLoosenthe needle.the needle clamp screw and remove Hold the needle with your left hand, and then turn the screwdriver counterclockwise with your right hand.

b a

aNeedle clamp screw

bScrewdriver

•Do not apply extreme force when loosening or tightening the needle clamp screw, otherwise damage to the machine may result.

eWith the flat side of the needle toward the rear of the machine, insert the needle until it touches the needle stopper.

a

fWhile holding the needle with your left hand, tighten the needle clamp screw.

Turn the screwdriver clockwise.

Install the twin needle in the same way.

CAUTION

●Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result.

aNeedle stopper

32