dRaise the presser foot lever, pass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.

a

a5 cm (2 inches)

XThe upper threading is finished. Now that the upper threading and the lower threading are finished, you are ready to begin sewing.

Note

●If the needle is not raised, the needle threader cannot thread the needle. Be sure

to press (needle position button) to raise the needle before using the needle threader.

■For models without the thread guide disk

aWhile lowering the needle threader lever, hook the thread onto the guide.

aNeedle threader

bThread

cGuide

bCatch the thread on the hook as shown below.

1

a

aNeedle threader lever

cRaise the needle threader lever, and then pull the end of the thread which passed through the eye of the needle.

CAUTION

●Be careful not to pull on the thread with force or it may bend the needle.

dRaise the presser foot lever, pass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.

a

a5 cm (2 inches)

XThe upper threading is finished.

25