GETTING READY—————————————————————————————————————————————————————————————————————————————————————————————————————

Changing the initial needle position

Normally, the straight stitch (left needle position) is automatically selected when the sewing machine is turned on. The machine can be set so that the straight stitch (center needle position) is automatically selected when it is turned on.

aTurn off the sewing machine.

bWhile pressing (needle mode selection key), turn on the sewing machine.

When the machine beeps twice, release the needle mode selection key.

aNeedle mode selection key (single/twin)

X The initial needle position is changed to the center needle position.

Memo

●The specified initial needle position is maintained even after the machine is turned off.

●Perform the same operation to change the initial needle position to the left needle position.

38