GETTING READY—————————————————————————————————————————————————————————————————————————————————————————————————————

cLower the presser foot lever, insert the presser foot holder screw, and then tighten the screw with the screwdriver.

a

aPresser foot holder screw

CAUTION

●Be sure to securely tighten the screw with the screwdriver, otherwise the needle may touch the presser foot, causing it to bend or break.

●Before starting to sew, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

Note

●When sewing with the walking foot, sew at a speed between slow and medium.

■Removing the walking foot

aPress (needle position button) once or twice to raise the needle.

aNeedle position button

X The needle is raised.

bTurn off the sewing machine.

cRaise the presser foot lever.

a

aPresser foot lever

XThe presser foot is raised.

dWith a screwdriver, loosen the presser foot holder screw, and then remove the walking foot.

a

aPresser foot holder screw

eAttach the presser foot holder.

•For details, refer to “Removing the presser foot holder” (page 34).

Memo

●Only the straight stitch (with reinforcement stitching) and the zigzag stitch can be used with the walking foot. For details on the stitches, refer to “Stitch Settings” (page 89).

●The optional walking foot is available through your Brother dealer.

36