CHAPTER 5 MAINTENANCE

5.Unpack the drum unit and gently shake it five or six times horizontally.

Fig. 5-11 Unpacking the Drum Unit

6. Remove the protective parts - in order as shown below.

Fig. 5-12 Removing the Protective Parts

Caution

Only unpack a drum unit immediately before installing it into the printer. If an unpacked drum unit is subjected to direct sunlight or room light, the unit may be damaged.

Handle the toner cartridge and the drum unit carefully as it may contain the toner. If toner scatters and your hands or clothes get dirty, wipe or wash it off with cold water immediately.

5–7

Page 47
Image 47
Brother HL-600 manual Remove the protective parts ① ⑥ in order as shown below