CHAPTER 6 TROUBLESHOOTING
CHAPTER 6
TROUBLESHOOTING
ALARM INDICATIONS AT A GLANCE
Operator Calls
If an error occurs, the printer indicates an ‘operator call’ by blinking the
ALARM lamp and any of the following lamps.
Find the error and take the proper action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the switches as described below.
Blinking Lamp
PAPER ❍↔● ALARM❍↔●
COVER ❍↔● ALARM❍↔●
TONER ❍↔● ALARM❍↔●
( every 5 seconds)
TONER ❍↔● ALARM●↔●
Error
Paper jam
Paper empty
Mis Feed
Cover open
Toner low
Toner Empty
Action
Clear the paper jam referring to the next section “PAPER JAMS” and press the FF/CONT switch if the printer does not automatically resume printing.
Load paper in the printer referring to Chapter 2 and press the FF/CONT switch.
Reinstall the paper and press the FF/CONT switch.
Close the top cover of the printer or install the multi- purpose sheet feeder into the printer firmly.
Indicates that the printer has approximately 100 pages of printing left before the toner cartridge is empty.
Replace the toner cartridge with a new one.
