INSTALLATION
TowerFeed is factory preset for the Brother HL-7050 printer. Therefore, it is not necessary to run the TowerFeed
setup program for this printer type.
The TowerFeed Option must be selected using the printer panel as following:
• Press and hold the GO button and press the Set button once. The Display will now show HIDDEN PANEL
TOWERFEED ON/OFF.
• Press the + or – buttons as many times until the display shows 'TowerFeed ON/OFF'.
• Press SET to enter into this menu item and press + or - until 'TowerFeed=ON' appears.
• Press SET.
• Press GO.
Now the printer performs a selftest and after this TowerFeed should do a short beep (reset beep of
TowerFeed). The option TowerFeed is activated now.
The Interface should be checked/selected using the printer panel (standard setting):
• Press the + button as many times until the display shows --MENU-- INTERFACE
• Press SET once (SELECT INTERFACE)
• Press SET once
• Navigate to the display SELECT =AUTO using the buttons + or -.
• Press SET once
• Press the button BACK twice, the display should show READY.