Chapter 5
24
Contrast 5
If your document is very light or very dark, you
may want to change the contrast. For most
documents the default setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
aMake sure you are in Fax mode .
bLoad your document.
cPress Menu, 2, 2, 1.
dPress a or b to choose Auto, Light
or Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
Changing Fax Resolut ion 5
The quality of a fax can be improved by
changing the fax resolution. Resolution can
be changed for the next fax or for all faxes.
To change the fax resolution for the
next fax 5
aMake sure you are in Fax mode .
bLoad your document.
cPress Resolution and then a or b to
choose the resolution.
Press OK.
To change the default fax resolution 5
aMake sure you are in Fax mode .
bPress Menu, 2, 2, 2.
cPress a or b to choose the resolution
you want.
Press OK.
Note
• You can choose four different resolution
settings for monochrome faxes and two
for colour.
If you choose S.Fine or Photo and then
use the Colour key to send a fax, the
machine will send the fax using the Fine
setting.
• The time to send will increase when
selecting S.Fine or Photo.
Monochrome
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission.
Colour
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.