84
Printed text or i mages are skew ed. Make sur e the paper is loaded pr operly in the paper tr ay and the paper side gu ide
is adjusted correctly. (See Loading paper and oth er media on page 11.)
Make sure the Lower Jam Clear Cover is set properly.
Smudged stain at the top ce ntre of
the printed page.
Make sure the paper is not too thick or curled. (See Acceptable paper and other
mediaon page 7.)
Printing appears dirty or ink se ems
to run.
Make sure you are using the proper types of paper. (See Acceptable paper and
other mediaon page 7.) Don't handle the paper until the ink is dry.
Stains appear on the r everse side
or at the bottom of the page.
Make sure the printer platen is not dirty with ink. (See Cleaning the machine printer
platen onpage 97.)
Make sure you are using the paper support flap. (See Loading paper and other
mediaon page 11.)
The machine prints dense lines on
the page.
Check ReverseOrder in th e Basic tab of the printer driver.
The printouts are wrinkled. In the printer driver Basic ta b, click the Settings, and uncheck the
Bi-DirectionalPrin ting.
Cannot perform ‘2 in 1 or 4 in 1’
printing.
Check that the paper size setting in the application and in the printer driver are the
same.
Print speed is too slow . Try changing the printe r driver setting. T he highest resolut ion needs longer dat a
processing, sending and printing time. Try the other quality settings in the printer
driver Basic tab. Also, click the Settings tab, and make sure you uncheck
Colour Enhancement.
Set the borderless featu re off. Borderless printing is slower th an normal printing.
(See Printing for Windows® or Printing and Faxing for Macintosh® in the Software
User's Guide on the CD-ROM.)
Machine feeds multiple pages Make sure the paper is loaded properly in the paper tray. (See Loading paper and
other mediaon page 11.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Printed pages are not stacked
neatly.
Make sure you are using the paper support flap. (See Loading paper and other
mediaon page 11.)
Printed pages double-feed and
cause a paper jam.
Close the output paper tray cover and slid e it forward, then p ush the paper tray
firmly back into the machine. While holding the paper tray in place, pull out the
paper support until it clicks and unfold the paper support flap. (See the illustrations
in Loading paper and other media on page12.)
Machine does not print from Paint
Brush.
Try setting the Display setting to ‘256 colours.’
Machine does not print from Adobe
Illustrator. Try to reduce the p rint resolution. (See Printi ng for Windows® or Printing and
Faxing for Macintosh® in the Software User's Guide on the CD-ROM.)
The machine cannot pr int full
pages of a document.
Out of Memory message
occurs.
Reduce the printing resolution. (See Printing for Windows® or Printing and Faxing
for Macintosh® in the Software User's Guide on the CD-ROM.)
Reduce the complexity of your document and try again. Reduce the graphic
quality or the number of font sizes within your application software.
Printing (Continued)Difficulty Suggestions