Chapter 11
58
Setup for delayed polling
receive 11
Delayed polling lets you set the machin e to
begin polling receive at a later time. You can
only set up one delayed polling operation.
aMake sure you are in Fax mode .
bPress Menu, 2, 1, 7.
7.Polling RX
cPress a or b to choose Timer.
Press OK.
dEnter the time (in 24-hour format) you
want to start polling.
Press OK.
For example, enter 21:45 for 9:45 PM.
eEnter the fax number you are polling.
fPress Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Note
If the other fax machine that you are
calling has not been set-up for polling, you
will receive the message:
Connection Fail.
Sequential polling 11
The machine can request documents from
several fax machines in one operation.
aMake sure you are in Fax mode .
bPress Menu, 2, 1, 7.
7.Polling RX
cPress a or b to choose Standard,
Secure or Timer.
Press OK.
dDo one of the following:
If you chose Standard, go to
step e.
If you chose Secure, enter a four-
digit number, press OK, go to
step e.
If you did not enter the correct
Secure Code you will receive the
following message: Disconnected.
If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to stepe.
eSpecify the destination fax machines,
which you wish to poll by using One-
Touch, Speed-Dial, Search, a Group or
the dial pad. You must press OK
between each location.
fPress Mono Start or Colour Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and cancelling waiting
jobs on page 26.