Control panel setup
Node Name
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
a
b Press a or b to choose Network. Press OK.
c |
|
(For Wired) Press a or b to choose Wired LAN. |
|
(For Wireless) Press a or b to choose WLAN. | 6 |
Press OK. |
|
d Press a or b to choose TCP/IP. Press OK.
e Press a or b to choose Node Name. Press OK.
f
g Enter the Node Name using the dial pad. (To enter numbers and text, see Entering Text on page 225.) Press OK.
h Press Stop/Exit.
WINS Config
This selection controls how the machine obtains the IP address of the WINS server.
a
b Press a or b to choose Network. Press OK.
c
(For Wired) Press a or b to choose Wired LAN. (For Wireless) Press a or b to choose WLAN. Press OK.
d Press a or b to choose TCP/IP. Press OK.
97