Control panel setup
e Press a or b to choose IPv6. Press OK.
f Press a or b to choose On or Off. Press OK.
g Press Stop/Exit.
Note
•If you set IPv6 to On, turn off the power switch and then turn it back on to enable this protocol.
•After you choose IPv6 On, this setting will be applied to both the wired and wireless LAN interface.
Ethernet (wired network only)
Ethernet link mode. Auto allows the print server to operate in
You can fix the server link mode to
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
a
b Press a or b to choose Network. Press OK.
c
Press a or b to choose Wired LAN. Press OK.
d Press a or b to choose Ethernet. Press OK.
e Press a or b to choose Auto,
f Press Stop/Exit.
Setup Wizard
The Setup Wizard guides you through the wireless network configuration. (For more information, see the Quick Setup Guide or Using the Setup Wizard from the control panel on page 31.)
101