Control panel setup
Restoring the network settings to factory default
If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
b Press a or b to choose Network. Press OK.
c Press a or b to choose Network Reset. Press OK.
d e
6
f The machine will
Printing the Network Configuration List
Note
Node name: Node name appears on the Network Configuration List. The default node name is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the network print server settings.
a
b (For MFC model) Press a or b to choose Print Reports. (For DCP model) Press a or b to choose Machine Info.. Press OK.
c Press a or b to choose Network Config. Press OK.
d Press Start.
Note
If the IP Address on the Network Configuration List shows 0.0.0.0, wait for one minute and try again.
123