Configuring your machine for a wireless network (For
Note
To use a Windows Vista® computer as a Registrar, you need to register it to your network in advance. See the instruction manual that came with your access point/router.
1Click the button and then Network.
2 Click Add a wireless device. | 3 |
3Choose your printer and click Next.
4Input the PIN which the LCD shows in step d and then click Next.
5Choose your network that you want to connect to, and then click Next.
6Click Close.
f If the LCD shows Connected, the machine has successfully connected to your access point/router. You can now use your machine in a wireless network.
If the LCD shows Connection Fail, the machine has not successfully connected to your access point/router. Try starting from step c again. If the same message is indicated again, reset the machine back to the default factory settings and try again. (For resetting, see Restoring the network settings to factory default on page 123.)
If the LCD shows No Access Point, the machine has not detected your access point/router on your network with the
Or an incorrect PIN has typed into the WPS
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the
Using the Brother installer application on the
For installation, see Wireless configuration for Windows® using the Brother installer application (For
40