Wireless configuration for Macintosh using the Brother installer application (For
Configuration using the SES/WPS or AOSS™ from the control panel menu (Automatic Wireless mode)
IMPORTANT
•If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation.
•If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset, press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically.
a Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch. b Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
72.WLAN 7.WLAN Enable
aOn
bOff
Select ab or OK
c
5
d Put the supplied
e
78