The Standard TCP/IP Port Wizard will start.
Enter the IP address of your network printer. Click Next. Click Finish.
Click the Ports tab and click Add Port.
(Windows Server® 2008)
Click the Start button, Control Panel, Hardware and Sound, and then
(Windows® XP and Windows Server® 2003)
Click the Start button and choose Printers and Faxes.
(Windows® 2000)
Click the Start button and choose Settings and then Printers.

Network printing from Windows®: basic TCP/IP Peer-to-Peer printing

Printer driver already installed

If you have already installed the printer driver and wish to configure it for network printing, follow these steps:

a (Windows Vista®)

Click the button, Control Panel, Hardware and Sound, and then Printers.

Printers.

b Right click on the printer driver you wish to configure, and then choose Properties.

c

d Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the 8 New Port... button.

e f g h

Close Printer Ports and Properties dialog box.

Other sources of information

See Configuring your machine for a network on page 12 to learn how to configure the IP address of the printer.

131