Wireless configuration for Macintosh using the Brother installer application (For
Configuration in
Before configuring the wireless settings
IMPORTANT
•The following instructions will install your Brother machine in a network environment using the Brother installer application for Macintosh found on the
•You can also setup your Brother machine using the machine’s control panel which we recommended. See Configuring your machine for a wireless network (For
• If you have previously configured the wireless settings of the machine, you must reset the network LAN | 5 | |
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset, | ||
| ||
press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically. |
|
•If you are using a firewall function of
Configure the wireless settings
a Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch. b Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
72.WLAN 7.WLAN Enable
aOn
bOff
Select ab or OK
c
d Put the supplied
83