Follow the steps below to prepare and use the machine simply.
However, before you perform these steps, see Important Safety Information (page 152), and Advice for Preparation and Simple Use Guide (page 4).
If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE.
1 Read the Quick Setup Guide
Follow the instructions on the Brother Quick Setup Guide to set up the machine.
2 Setting the Document
You can scan the document for faxing and copying from either the ADF (Automatic Document Feeder) or from the glass platen.
Using the ADF (Automatic Document Feeder)
The automatic document feeder (ADF) can hold up to 50 pages, feeding each one individually through the machine. Use standard (75 g/m2) paper when using the ADF. Always fan the pages well before placing them in the feeder.
Recommended Environment
Temperature:
Humidity:
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or fabric. (To copy or scan this kind of document, see Using the Glass Platen, page 2.)
■Make sure documents written with ink are completely dry.
■Documents must be from 14.7 to 21.6 cm wide, and from 12.7 to 35.6 cm long.
1Insert documents face up, top edge first.
2Adjust the paper guides to fit the width of your pages.
3Stagger the pages. Then place them in the ADF, until you feel the first page lightly touch the feed roller.
PREPARATION USE SIMPLE AND
Documents are Face Up in the ADF
Document Stopper
Preparation and Simple Use Guide 1