7 Enter a 4-digit password, followed by Set.

This is the same as the security password of the machine already stored.

The screen displays ACCEPTED for 2 seconds, followed by SECURE MODE - Memory Security is now switched ON.

If the password you enter at Step 7 is incorrect, the screen would display WRONG PASSWORD. After 2 seconds the display will then return to normal (displaying the date & time). You must then switch ON Memory Security again. (See Switching Memory Security ON, page 42.)

Changing the Memory Security Password

1 Press Menu, 2, 0, 1.

2 Press or to choose SET PASSWORD.

3 Press Set.

The screen prompts you to enter the old password.

OLD PASSWD:XXXX

ENTER & SET KEY

4 Enter the current password.

5 Press Set.

6 Enter a 4-digit number as a new password.

7 Press Set.

The screen prompts you to re-enter the new password.

NEW PASSWD:XXXX ENTER & SET KEY

VERIFY:XXXX ENTER & SET KEY

8 Enter the new password again and press Set. 9 Press Stop/Exit.

Switching Memory Security ON

1 Press Menu, 2, 0, 1.

2 Press or to choose SET SECURITY.

3 Press Set.

The screen prompts you to enter the password.

4 Enter a 4-digit password, followed by Set.

PASSWORD:XXXX ENTER & SET KEY

This is the same as the security password of the machine already stored.

The screen displays ACCEPTED for 2 seconds, followed by SECURE MODE - Memory Security is now switched ON.

If the password you enter at Step 4 is incorrect, the screen would display WRONG PASSWORD. After 2 seconds the display will then return to normal (displaying the date & time). You must then start from Step 1 to set Memory Security.

42Chapter 6