Two-Sided Printing (Manual Duplexing)

The supplied printer driver for Windows® 95, 98, 98SE, Me and for Windows NT® Workstation Version 4.0 enables manual duplex printing. (For more information, see the Help screen for the printer driver.)

The machine prints all the even-numbered pages on one side of the paper first. Then, the Windows® driver instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or very thick paper is not recommended.

Please ensure that after making the first print of your “DUPLEX PRINT JOB” the printed sheet gose into the paper tray face-up. Please note the correct orientation, as in the diagram.

When you use the manual duplex function, it is possible that a paper jam may occur or the printer quality might not be satisfactory.

Manual Feed Slot

The machine has a manual feed slot above the paper tray. You can load envelopes and special print media one at a time into this slot. You do not have to remove paper from the paper tray. (See Acceptable Paper, page 68.)

Use the manual feed slot to print or copy on labels, envelopes, card stock or thicker paper. (See Printing on Thicker Paper and Card Stock, page 65.)

If you use labels and envelopes, they must be of a type suitable for use with a laser printer. If you use incorrect types it is possible to damage or contaminate the drum surface and cause printing problems.

PRINTER/SCANNER

Using the machine as a Printer 63