USER’S GUIDE
Q & A
This section contains questions and answers for using your machine. If you have encountered a problem, find the question relating to your problem and take the steps recommended to correct the problem.
Setting Up the Machine Hardware
Question | Recommendation |
The machine does not work. | The machine may be in sleep mode. Press the panel |
All lamps are off. | switch to wake up the machine. Check to see if the |
| machine is plugged into a live power source and the |
| power switch is on. |
The machine does not print. | Check the following: |
| The machine is turned on. |
| All of the protective parts have been removed. |
| The toner cartridge and drum unit are installed |
| properly. |
| The interface cable is securely connected between |
| the machine and computer. |
| Check to see if the Alarm lamp is blinking. If the |
| lamp is blinking, refer to the Operator Call section |
| of this manual. |
| Check to see if the Ready lamp is blinking. If the |
| lamp is blinking fast, the machine might be |
| cooling down to lower the machines internal |
| temperature. Open the top cover of the machine to |
| lower the temperature. |
Setting Up the Machine for Windows | |
|
|
Question | Recommendation |
I cannot print from my | Make sure the supplied Windows printer driver is |
application software. | installed and selected with your application software. |
Sometimes I get a Memory | Reduce the print resolution or reduce the complexity |
Full message. How can I | of your document and try again. |
correct this? |
|
Sometimes I get a Print | If you are using the supplied Windows driver, turn |
Overrun error when printing | error recovery on in the Setup dialog box and try |
certain documents from | again. |
Windows. | Reduce the print resolution or reduce the complexity |
| of your document and try again. |
