Brother MFC/HL-P2000 Paper Handling, Question, Recommendation, See “PAPER JAMS” in this chapter

USER’S GUIDE

Paper Handling

Question	Recommendation
The machine does not load	￿	Check to see if the “ PAPER EMPTY” message
paper.		appears on your computer screen or the Alarm
		and Paper lamps are blinking on the machine
		control panel. If so, the multi-purpose sheet feeder
		may be out of paper or not properly installed. If it
		is empty, load a new stack of paper into the
	￿	feeder.
		If there is paper in the multi-purpose sheet feeder,
		make sure it is straight. If the paper is curled, you
		should straighten it before printing. Sometimes it
		is helpful to remove the paper, turn the stack over
	￿and put it back into the paper tray.
		Reduce the amount of paper in the multi-purpose
		sheet feeder, then try again.
How can I load envelopes?	You can load envelopes from either the multi-purpose
	sheet feeder or the manual feed slot. Your application
	software must be set up correctly to print on the
	envelope size you are using. This is usually done in
	the page setup or document setup menu of your
	software. Refer to your application manual.
What paper can I use?	You can use plain paper, envelopes, transparencies,
	labels, and organizer paper. For information on
	loading paper, see “Paper Handling” in Chapter 2 .
How can I clear paper jams?	See “PAPER JAMS” in this chapter.

7-12