USER’S GUIDE
Copy
Question | Recommendation |
The machine does not copy. | Check the following; |
| The machine is turned on. |
| All of the protective parts have been removed. |
| The top cover is closed. |
| The Alarm LED is blinking. If the LED is |
| blinking, refer to the Operator Calls section of this |
| manual. |
The machine copies, but | check if; |
nothing is printed on the copy. | Original documents are inserted face down in the |
| document feeder. |
| The toner cartridge is not empty. |
Copy has a vertical line. | Clean the scanning unit refering to ‘Cleaning the |
| Scanning Unit’ section in Chapter 6. |
Some portion of the image is | The machine has unscannable and unprintable |
missing on the copy. | areas. Check the areas in Chapter 2. |
| If the image is larger than the paper size, it may be |
| lost. |
Memory full error. | A DOS application is using download fonts and |
| the memory is almost full. |
| After a memory full error occurs, the machine |
| clears any downloaded fonts automatically. |
Scan |
|
|
|
Question | Recommendation |
The machine does not scan | Check the following; |
| The machine is turned on. |
| All of the protective parts have been removed. |
| The top cover is closed. |
Computer indicates an error | Check the following; |
message other than above. | The machine is connected directly to the |
| computer. |
| The computer can work in |
| The scanner port is correctly set on your |
| computer. |
| The Scanner driver is correctly selected in your |
| application. |
| A recommended interface cable is being |
| used.(IEEE 1284 compliant) |
Scanned image has vertical | Clean the scanning unit. |
white or black line. |
|
