Brother MFC7150C Using the 3D FaxSpeed Macro, How to Read an InfoImage that Was Printed at Your

206 C H A P T E R T W E N T Y - O N E

Using the 3D FaxSpeed Macro

To print the current document in your word processor directly to 3D FaxSpeed:

1Open your word processor application, and open or create the required document.

2Select the Run 3D FaxSpeed option from the File menu. The current file will be generated into an InfoImage. Then the 3D FaxSpeed Setup dialog box will appear.

3Specify the required settings in this dialog box.

4To change additional settings, select the Fax/Printer… button. The 3D FaxSpeed Setup dialog box will appear (see Selecting Multi-Function Link Pro as Your Printer).

5Select OK to send the InfoImage to Multi-Function Link Pro.

How to Read an InfoImage that Was Printed at Your

MFC

If your system is set up to print received faxes at the MFC, the incoming InfoImage will be printed at the MFC. To read the printed InfoImage, you must first scan it into your computer so 3D FaxSpeed can read the file.

Follow these steps when a received InfoImage printed at the MFC:

1After the InfoImage is received and printed by the MFC, place the printed InfoImage page(s) into the MFC’s document feeder.

2On your computer, open 3D FaxSpeed Read module and select the Brother MFL Pro Color driver to scan the InfoImage into your com- puter. 3D FaxSpeed will run the Multi-Function Link Pro Scanner application automatically.

•As each page is scanned, 3D FaxSpeed shows you how many InfoImage blocks have been read and how many are still unread. 3D FaxSpeed will not accept a page from a different InfoImage.

3After all the pages of the InfoImage have been scanned, 3D FaxSpeed automatically retrieves and decompresses the original files from the InfoImage and saves them in a Log file.

43D FaxSpeed displays a list of the retrieved files and lets you save each one as a file.