Brother MFC7160C Manual Transmission, Automatic Transmission, Manual and Automatic Fax Redial

S E T U P S E N D 57

See

One-Touch

Dialing

p. 78

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.

1Insert the document face down in the feeder.

2Pick up the handset and listen for a dial tone

— OR—press Hook or Speaker Phone and listen for a dial tone.

3Enter the fax number you want to call (you can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call from the Tel-index).

4When you hear the fax tone, press Start .

5If you’re using the handset, hang up.

See

Speed Dialing

p. 78

Automatic Transmission

This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset, or press Hook or Speaker Phone .

1Insert the document face down in the feeder.

2Enter the fax number using One Touch, Speed Dial, Tel-index or the dial pad.

3Press Start .

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the number.

If you’re sending a fax automatically and the line is busy, the MFC will automatically redial up to three times at 5 minute intervals.

Dual Access

If the document feeder is empty, you can place a document in the feeder, set temporary settings, dial a number, and begin scanning the fax into memory, even when the MFC is receiving a fax, sending a fax, or printing a fax from memory. The screen displays the new job number and how much memory is available.

If you get a MEMORY FULL message while scanning the first page of a fax press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.