Brother MFC7150C, MFC7160C owner manual Paper Specifications for Casette and Manual Feed Slot

26 C H A P T E R T H R E E

■Brother coated (ink jet) paper is coated only on one side. Make sure this whiter (coated) side is facing up toward you. Therefore, when loading paper in the paper cassette, make sure that the whiter side (the coated side) is facing up.

■The coated side of glossy paper is shiny. Do not touch the shiny side. Load glossy paper in the feeder with the shiny side facing up toward you.

■DO NOT touch the coated side of the paper or both sides of Transparencies, because it absorbs water and perspiration easily, and might cause decreased output quality.

■For optimum output quality, be sure to use paper appropriate for your resolution setting.

■Store paper in the original bag, and keep it sealed. Keep the paper flat and away from moisture and direct sunlight and heat.

■Transparencies designed for laser printers/copiers may stain your next document. Use only recommended transparencies.

Paper Specifications for Casette and Manual Feed Slot

Paper Type	Paper Size	Cassette Capacity
Cut Sheet	Letter, Executive	200 Sheets of 20 lb(75 g/m2)
	Legal	100 Sheets of 20 lb(75 g/m2)
Coated Paper	Letter	100 Sheets
Transparencies	Letter	20
Glossy Paper	Letter	20
Envelopes	DL, COM-10, C5,	10
	B5, Monarch
Organizer	J(Manual Feed Slot Only), K, L	10

Paper Capacity for Feeder

Cut Sheet Paper Weight 16 to 32 lb (60 to 120 g/m2 )

Sheet Feeder: Up to 0.87 inches (22mm) / Approximately 200 sheets of 20 lb (75 g/m2 )

Output Stacker: Approximately 75 Sheets of 20 lb (75 g/m2)

Transparencies and glossy paper must be picked up from the paper tray one page at a time.