Brother PE-150 manual Accessories, Parts Name Parts Code

ACCESSORIES
1	2	No.		Parts Name			Parts Code
		1		Cleaning brush			XA4527-001
		2		Needle set			X59535-001
				75/11 3pcs., 90/14 1 pc.
		3		Screwdriver			X53666-001
		4		Scissors			184783-001
		5		Seam ripper			X54243-001
3	4	6		Bobbins (4 pcs)			*****
		7		Spool cap (Small)			130013-003
		8		Spool cap (Large)			130012-003
		9		Embroidery sheet (Regular)			XA3728-001
		10		Embroidery frame (Regular)			X58739-003
		11		Machine cover (soft type)*			X59351-001
		12		Extra spool pin**			130920-051
5	6	13		Net***			127610-000
		14		Machine cover****			XA0181-051
		*	When placing the machine cover on the
			machine while the embroidery frame is still
			attached,		touch	“CHARACTERS		&
			DESIGNS” or “CARD” to return the
			embroidery arm to it’s storage position. An
7	8		alternate method to return the embroidery
			arm to it’s storage position would be to turn
			the machine off and then turn it on again,
			allow the arm to re-set itself and then turn off
			the machine.
			A cover might not be provieded in some
			countries.
		**	An extra spool pin should be used for
			decorative thread such as metallic thread.
9	10	***	If using special threads which wind quickly
			off the thread spool, attach a net to the spool
			before using.
		****	In some countries, the No. 14 machine cover
			is supplied as an accessory in place of the
			No. 11 machine cover (soft type).
		*****Distributed in sets of 10 when ordered
			separately.
			(Parts Code)
11	12		USA and Canada: XA3811-051
			Other countries: XA3812-051
13	14
6

	CONTENTS
	KNOWLEDGE	MACHINE
	EMBROIDERING
	MAINTENANCE
	MESSAGE	ERROR
	TROUBLESHOOTING
	PATTERNS
(OPTIONAL)	FRAME	USING A SMALL	EMBROIDERING
FRAME (OPTIONAL)	EXTRA-SMALL	USING A	EMBROIDERING
(OPTIONAL)	FRAME	USING A LARGE	EMBROIDERING