Brother PT-2600 manual Length Function, To select the on mirror printing setting

EXAMPLE

To select the ON mirror printing setting:

1While holding down c, press ponce, and keep cheld down.

2While still holding down c, continue pressing puntil ON is displayed.

3Release c.

M I R R O R A B C O F F

M I R R O R	C B A
O N

-Tape	-
TZ	AV

LENGTH FUNCTION

Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The Length function allows you to set the label length between 1.6” and 11.8” (4.0 cm and 30.0 cm).

The default length setting is OFF. When the Length function is set to ON, the Length indicator on the right side of the display comes on.

☞The label length setting is only applied to labels printed on TZ tape. The label length of AV labels cannot be adjusted.

To turn the Length function on or off:

1	While holding down c, press Tonce, and keep cheld down to display the cur-
	rent length of the label (the text and both margins). Then, the display will show the cur-
	rent label length setting (ON or OFF).
2	While still holding down c, continue pressing Tuntil the desired label length setting
	is displayed.

☞ The Length indicator comes on when ON is selected.

3 Release c. If ON was selected, the current label length setting is displayed.

4Press eor hto select the desired length or use the number keys to enter a length.

☞To change the units (inches or centimeters) used to display the label length, press Muntil the desired units are displayed.

To change the length in 1” (1.0-cm) steps, hold down either eor h, and then release the key when the desired setting is displayed.

94