Brother PT-2600 manual TZ CUT Function, To turn the TZ Cut function on or off

-Tape	-
TZ	AV

TZ CUT FUNCTION

The TZ Cut function allows you to set whether or not the machine will automatically cut each TZ label after it is printed. Turn on the TZ Cut function before starting to print in order to cut the labels automatically after printing them.

TZ-Tape

☞After printing a label on TZ tape with the TZ Cut function set to OFF, hold down c and press ronce to feed the tape, then cut it.

AV-Label

☞AV labels are always cut off after each one is printed regardless of the current TZ cut set- ting. However, when printing multiple copies of AV labels with the Numbering func- tion, Repeat printing function or Memory print function, you can choose whether to cut off each label after it is printed or cut off the string of labels only after they have all been printed.

To turn the TZ Cut function on or off:

1While holding down c, press Zonce, and keep cheld down to display the cur- rent TZ cut setting.

2	While still holding down c, continue pressing Zuntil the desired TZ cut setting is
	displayed.
3	Release cto apply the selected TZ cut setting.

EXAMPLE

To turn the TZ Cut function on:

1While holding down c, press Zonce, and keep cheld down.

2While still holding down c, continue pressing

Zuntil ON is displayed.

3Release c.

T Z C U T O F F

T Z C U T O N

99