Brother PT-2600 Tape Margin Function, To change the tape margin setting, Rent tape margin setting

-Tape	-
TZ	AV

TAPE MARGIN FUNCTION

The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text.

The default tape margin setting is FULL; however, three other settings are also available.

FULL

(1" (24 mm) margins)

NONE

(1/6" (4 mm) margins)

NARROW

(5/16" (8 mm) margins)

HALF

(1/2" (12 mm) margins)

☞When a setting other than FULL is selected, extra tape is fed out before printing starts. The extra tape is cut off of TZ labels if the TZ Cut function is set to ON. This makes the left and right margins equal.

The tape margin setting is only applied to labels printed on TZ tape. The tape margins of AV labels cannot be adjusted.

To change the tape margin setting:

1	While holding down c, press Eonce, and keep cheld down to display the cur-
	rent tape margin setting.
2	While still holding down c, continue pressing Euntil the desired tape margin setting
	is displayed.
3	Release cto apply the selected tape margin setting to the entire text.

EXAMPLE

To select the HALF tape margin setting:

1While holding down c, press Eonce, and

keep cheld down.

M A R G I N

F U L L

91