Brother PT-2600 manual Style Function, Following style settings are available

-Tape		-Label
TZ	V
	A

STYLE FUNCTION

You can choose from eleven different character styles to apply to your text (including vertical printing).

☞Characters printed using the smaller sizes may be difficult to read if certain style settings (e.g., I+SHAD) are selected.

The following style settings are available:

NORMAL, BOLD, OUTLINE, SOLID, SHADOW, ITALIC, I+BOLD (italic & bold), I+OUTL (italic & outline), I+SOLID (italic & solid), I+SHAD (italic & shadow), VERT (verti- cal)

The default style setting is NORMAL. The style indicator at the bottom of the display shows the current style setting when any setting other than NORMAL is selected.

Refer to Reference at the end of this section for samples of the available settings.

To change the style setting:

1Press monce to display the current style setting.

2Continue pressing muntil the desired style setting is displayed.

☞ The current style setting is shown by the style indicator at the bottom of the display.

3 Press _to apply the selected style setting to the text.

EXAMPLE

To select the I+SHAD style setting: 1 Press monce.

S T Y L E

N O R M A L

2Continue pressing muntil I+SHAD is displayed.

S T Y L E

I + S H A D

3Press _.

86