Brother PT-2600 manual Print KEY, Feed & CUT Function, To print a label, 100

-Tape		-Label
TZ	V
	A

PRINT KEY

After you have entered your text and chosen the desired format settings, you are ready to print.

TZ-Tape

☞If the TZ Cut function is set to ON, TZ labels will automatically be cut after they are printed.

AV-Label

☞AV labels are always cut off after they are printed. However, when printing multiple copies of AV labels with the Numbering function, Repeat printing function or Memory print function, you can choose whether to cut off each label after it is printed or cut off the string of labels only after they have all been printed.

To print a label:

●Press p once. The message “COPIES” followed by the number of the label being printed is displayed.

☞If the selected character size is too large for the width of the installed tape cassette,

the message “CHR SIZE AUTO?” appears. To allow the text size to automatically be adjusted, press por _. To stop the text size from being changed, press *.

EXAMPLE

To print and cut a label: ● Press ponce.

C O P I E S 1 / 1

-Tape	-
TZ	AV

FEED & CUT FUNCTION

The Feed & Cut function is used to feed out 1” (24 mm) of TZ tape and automatically cut it off, for example, after printing with the TZ Cut function set to OFF or when printing has been interrupted.

☞Only TZ tape can be fed out and cut using this function. If an AV label cassette is installed when cis held down and ris pressed, the error message “CAN’T FEED

AV LABELS” appears.

100