Brother PT-2600 manual Delete KEY, Line OUT Function

-Tape		-Label
TZ	V
	A

DELETE KEY

The Delete (backspace) key ( *) allows you to remove characters to the left of the cursor’s current position. It differs from the left cursor key ( f), which only moves the cursor with- out deleting any characters.

The delete key can also be used to quit most functions and return to the previous display with- out changing the text.

Some questions asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect files. In these cases, pressing * is like answering “no”.

☞To answer “yes”, press _. Refer to RETURN KEY on page 54.

To delete one character:

1Press f, w, eor hto position the cursor below the character immediately to the right of the character that you wish to delete.

2Press *once.

To delete a sequence of characters:

1Press f, w, eor hto position the cursor below the character immediately to the right of the last character that you wish to delete.

2Hold down *until all of the characters that you wish to delete are deleted.

To quit a function without changing your text:

●Press *to return to your text.

To answer “no”:

●Press *.

-Tape	-Label
TZ	AV

LINE OUT FUNCTION

With the Line Out function, you can easily remove an entire line of text.

To delete a line of text:

1Press f, w, eor hto position the cursor within the line of text that you wish to delete.

59