Brother QL-650TD manual „Power Cord, „Battery

10Introduction

Warning

„Power Cord

Follow the followings to avoid fire, damage, and electric shock.

Use only the authorized power source (120VAC) for the printer.

Do not plug too many leads into a single socket.

Do not damage or modify the power cord or plug. Also, do not place furniture or any heavy objects onto it, bend or pull it by constraint.

Do not use the power cord when it is damaged.

Do not touch the power cord or plug with wet hands.

Insert the power plug completely.

Do not insert the power cord into dilapidated power outlet.

„Battery

Follow the followings to avoid liquid leakage, heat, rupture of the battery.

Use only the authorized battery for the printer.

Do not throw into fire, heat up, or disassemble the battery.

Store the battery where children cannot reach. If you swallow the battery, contact the doctor immediately.

If the liquid inside of the battery get into your eyes, wash your eyes well with a lot of clean water and then see the doctor immediately.

If the liquid inside of the battery adhere to your skin or clothes, wash well with a lot of clean water.

Do not connect both poles of the battery with wire, keep the battery and metal necklace and hairpin together to avoid short-circuit of the battery.

Enclosed battery is not rechargeable. Do not recharge it.

Caution

„The Printer

Follow the followings to avoid personal injury and damage of the printer.

The standard electrical outlet shall be installed near the printer and shall be easily accessible.

„Power Cord

Follow the followings to avoid personal injury and damage of the printer.

If the printer will not be used for an extended period, remove the power supply cord from the electrical outlet.

Always hold the power plug when removing the power cord from or inserting it into the outlet. Pulling on the power cord could cause a problem with the power cord.

Use only the power cord included with the printer.