Brother QL-650TD manual Check the setting, and if it is set correctly, click Next

7 Check the setting, and if it is set correctly, click [Next].

Add-In settings screen is displayed.

•It may take a time to display the screen.

• If it is not set correctly, click [Back] and set it again.

8 Check the software with which you want to set the Add-In, and click [Next].

Driver Setup (Brother P-touch) screen is displayed.

Check the every application of Microsoft® Office® is quitted, and go to the next step.

For details on Add-In setting, refer to

Î"Software User's Guide (PDF Manual)".

9 When the message "Connect P-touch, and then turn it on." is displayed in the set-up screen, connect the USB cable and power cord to the printer.

As the caution label is put on the USB port of the printer, remove it and then connect the USB cable.

		Power cord slot
	USB port	Power cord
	USB cable
10	Connect the USB cable to the USB port of the PC.
	Press ON/OFF button ( ) of the printer to turn on the power.

When the PC recognizes the printer and the installation of driver is completed, User Registration screen is displayed.

When connecting the printer to PC via USB hub, it may not be connected correctly. At that time, connect the printer directly to the USB port of PC.

45

Introduction

STEP

1

Before using the printer

STEP

2

only this printer	(No PC)
Using

STEP

3

PC	For Windows
to your
Connecting	For Macintosh

STEP

4

Troubleshooting

Maintenance and