Brother QL-650TD manual Label outlet maintenance

4 Insert the edge (A) of cleaning sheet into the printing unit and pull it out to just in front of the cutter.

•Insert the sheet without removing the A part of sheet.

• Check that the printing surface of cleaning sheet is upward.

5 After inserting the cleaning sheet into the printing unit, push down the roll release lever and remove the B part of cleaning sheet.

6 Close the DK Roll cover and turn ON the power of the printer.

7 Press the Feed button for more than one second.

The roller spins by 4" (10 cm).

The adhesive face of cleaning sheet removes the stain or dust on the roller.

•If not pressing the Feed button for more than one

second, the roller spins only 1/3" (8 mm).

• Dispose the cleaning sheet after use.Feed button

Label outlet maintenance

When the glue is attached on the label
outlet (metallic plate part and resin	Label outlet
guide part) and the printer chews up a
label, pull out the power plug from the
outlet and clean it up with cloth dipped
into ethanol or isopropyl alcohol.
It is recommended to clean the label
outlet when replacing the cutter unit.

55

Introduction

STEP

1

Before using the printer

STEP

2

only this printer	(No PC)
Using

STEP

3

PC	For Windows
to your
Connecting	For Macintosh

STEP

4

Troubleshooting

Maintenance and